How to Jump Start a Car

Instructions

Park the two cars close together, but make sure they don’t touch.
Turn off the ignitions of both cars.
Open the hoods of both cars.
Locate the battery terminals on both cars. The positive terminal will be marked with a “+” sign, and the negative terminal will be marked with a “-” sign.
Attach the red jumper cable to the dead battery’s positive terminal.
Attach the opposite end of the red jumper cable to the functional battery’s positive terminal.
Attach the black jumper cable to the functional battery’s negative terminal.
Join the other end of the black jumper cable to a metal area of the engine block of the dead car, away from the battery.
Start the working car’s engine and let it run for a few minutes.
Try out to start the dead car’s engine. If it doesn’t start, let the engine of the operating car run for a few minutes longer before attempting again.
Once the engine of the dead car starts, turn off the engine of the working car.
Disconnect the jumper cables in the reverse order from which you attached them.

Always wear rubber gloves when working with batteries.
Never touch the metal parts of the jumper cables together.
Be careful not to let the jumper cables come into contact with the ground.
If you are not comfortable jump starting your car, call a tow truck or a roadside assistance service.

How to Jump Start a Car
A flat battery is a common problem that can happen to anyone. Don’t freak out if you find yourself stranded with a dead battery.
With a little know-how, you can jump start your car in no time.
.
What You’ll Need
A set of jumper cables
Rubber gloves
A wire brush
Instructions
Park the two cars close together, but make sure they don’t touch.
Turn off the ignitions of both cars.
Open the hoods of both cars.
Locate the battery terminals on both cars. The positive terminal will be marked with a “+” sign, and the negative terminal will be marked with a “-” sign.
Attach the red jumper cable to the dead battery’s positive terminal.
Attach the opposite end of the red jumper cable to the functional battery’s positive terminal.
Attach the black jumper cable to the functional battery’s negative terminal.
Join the other end of the black jumper cable to a metal area of the engine block of the dead car, away from the battery.
Start the working car’s engine and let it run for a few minutes.
Try out to start the dead car’s engine. If it doesn’t start, let the engine of the operating car run for a few minutes longer before attempting again.
Once the engine of the dead car starts, turn off the engine of the working car.
Disconnect the jumper cables in the reverse order from which you attached them.

Always wear rubber gloves when working with batteries.
Never touch the metal parts of the jumper cables together.
Be careful not to let the jumper cables come into contact with the ground.
If you are not comfortable jump starting your car, call a tow truck or a roadside assistance service.
Tips for Preventing a Flat Battery
Make sure your battery is properly charged.
Avoid leaving lights or accessories on when the car is not running.
Have your battery tested regularly by a qualified mechanic.
By following these simple tips, you can help prevent a flat battery and avoid being stranded on the side of the road.
Make sure your battery is properly charged.
Avoid leaving lights or accessories on when the car is not running.
Have your battery tested regularly by a qualified mechanic.

By following these simple tips, you can help prevent a flat battery and avoid being stranded on the side of the road.

For more following updates you can also follow us on Facebook, And Instagram or you visit our website